Click to enlarge

Order Extra Cables Here

Quick Look...

• Four Isolated Outputs
• Short Circuit Protected
• Eliminates Noisy AC Adapters
• Courtesy AC Outlet
• Noise Free Toroidal Transformer
• Cables Included
• 5 Year Warranty
• Hand Made in USA

Compatibility: 

Budda:
Phatman, Zenman

DMC:
Ground Control MIDI Foot controller

Digitech:
Whammy, RP100, 200, 300

Electro-Harmonix:
Hot Tubes, Black Finger, Zipper

H&K:
Rotosphere, Tubeman, Tube Factor

Line 6:
POD, Modeling Pedals

Mesa:
V-Twin, Bottle Rocket

Rocktron:
Replifex, Hush IICX

...and many more!

Overview: The Voodoo Lab Pedal Power AC is a pedalboard power supply designed to operate high current AC powered pedal effects. If you need a power supply for DC powered effects, please refer to the Pedal Power 2+. Finally a professional solution for powering tube overdrives, modeling pedals or devices including the Whammy, POD, Rotosphere and many others without wall warts. The Pedal Power AC provides two 9VAC and two selectable 9VAC or 12VAC outputs. It features a toroidal transformer and completely isolated outputs to insure noise free operation.  Made in the USA with a 5 year warranty.

Isolated Outputs: Each output is completely isolated. This means that you won't have any ground loops or interaction between pedals that can cause hum and noise.

Short Circuit Protection: Each output on the Pedal Power is short-circuit protected. This means that if you have a short in a power cable, or one of your pedals malfunctions, the Pedal Power will temporarily turn off the power to that pedal. All other outputs will continue to function normally and the Pedal Power is not damaged.

Toroidal Transformer: Power transformers create an electric field that can cause hum and noise in your effects. Some effects are particularly susceptible to this. A toroidal transformer has a specially designed core that greatly reduces this electric field. The Pedal Power uses this type of power transformer so that your pedal board is quiet.

Power Cables: We carry a wide selection of both stock and custom power cables to support the Pedal Power series. Stock cables included with the PPAC are: A detachable AC main power cable and 6 cables for your devices.  These all have a 5.5 x 2.5mm on one end to plug into the PPAC.  Four have 5.5 x 2.5mm and two have 5.5 x 2.1mm on the other end for your effects.   We also have custom cables for the Pedal Power AC. These include custom lengths, plug types, polarities, extensions, right angles, and longer IEC detachable AC power cords. We can also make extra long cables for certain applications.  See all the cables here.

Order Extra Cables Here