 |
Other versions available for:

• Can replace most any 9-volt DC power supply
• No transformer -- no heat dissipation or AC hum
• Takes up only one outlet socket space (unlike typical wall wart
adaptors).
• Can run off any mains supply (100-240v), no need for power transformers
when traveling abroad.
• Meets national safety regulations.

The Daisy Chain connector is not included. It is available here
with straight or right angle plugs in 4, 5 and 11 output versions. Standard
polarity 5.5 mm x 2.1 mm (tip negative; barrel positive) plugs connects
the PA-9 Power-All to 9-volt effect pedals. The Daisy Chain can also be
used with Power-All adaptor cables to power effects that use different
style jacks (reverse polarity, mini phone plug, battery clip, etc.). Link
multiple Daisy Chain connectors to power many 9-volt effect pedals or
similar devices (actual number of units depends on current draw of individual
units used).
Order Extra Cables Here

Extension Jumper is not included. It is available here
with straight or right angle plugs. The Cable-Black allows users to power
over-sized effect units or units with AC jacks in hard-to-reach places.
The Cable-Black is about 10 inches long from jack to jack and can be connected
to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.
* Boss, DanElectro, DOD, Dunlop, Electro-Harmonix, Fulltone, Ibanez,
Line 6, MXR, Morley, Pro Co Rat, Z-Vex are registered trademarks of their
respective companies and their usage implies no endorsement by or affiliation
with Stompin-Ground or Godlyke, Inc.
|
 |
Power supply only.
Daisy chain and jumper cables are NOT included.
Order daisy chain and jumper cables here
The simplest, most effective, most affordable method for powering your
9-volt effect units, the PA-9AU offers all the great features of our PA-9
Power-All, but with two-prong Aussie-Style connector with C-Tick certification
for use on the Australian continent and neighboring islands. Advanced
circuitry steps down high line voltages to 9-volts DC and automatically
supplies the required amount of current. 2000 mA current capability can
power over twenty 9-volt effects.
• Power-All 9 VDC, 2000 milliamp digital power supply
• LIFETIME WARRANTY – never buy another power supply!
• Power all your pedals from a single power supply
• Takes up only one outlet space
• Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro DA-1,
Dunlop ECB-003, Ibanez AC- 109, Guyatone AC-2, Maxon AC210N, Zoom AD-0006
and just about any other 9 VDC power adaptor
• Special, low-noise circuitry reduces ripple current and hum
• Ferrite-core filter module on power output cable reduces noise
and hum
• Powers 9 VDC effects from any electrical outlet in the world
• 10-foot power cable eliminates need for an extension cord
• Daisy chain and jumper cables are NOT included.
• Order daisy chain and jumper cables here

We have stock cables
and even some custom extensions available. Click
here and see more cables for the Power All System
1/8" Phone Plug Jumper (also known as a 3.5mm mini plug) is
not included. It is available here with straight
or right angle plugs. The Cable-Blue allows users to power effect units
that use a 1/8" phone plug connector with tip-positive polarity.
The Cable-Blue can be connected to any jack on the Cable-5 Daisy Chain
or directly to the PA-9 itself. Note that to achieve tip-negative polarity
from the Cable-Blue, simply attach a Cable-Red in between it and the power
source. Tip positive / sleeve negative, for use with Jacques, older DOD,
Pro Co Rat, and some EH effects.
Reverse Polarity Jumper is not included. It is available here
with straight or right angle plugs. The Cable-Red allows the user to power
effect units that have reverse polarity barrel connectors. The Cable-Red
can be hooked to any jack on the Cable-5 daisy chain or directly to the
PA-9 itself. Center positive / barrel negative, for use with older Dunlop,
and some Fulltone effects.

Battery Clip Jumper is not included. It is available here.
The Cable-Gray allows the user to power vintage and boutique effect units
that do not have an external AC power jack. The Cable-Gray hooks directly
to the unit's Battery Clip and can be connected to any jack on the Cable-5
Daisy Chain or directly to the PA-9 itself. Use with older effects and
new boutique units without DC jacks such as older Ibanez, older MXR, Z-Vex
and others.
Reverse Polarity Jumper is not included. It is available here
with straight or right angle plugs. The Cable-Green allows the user to
power Line-6 Stomp-Box modelers from the PA-9. The Cable-Green features
a reverse-polarity barrel connector with a larger 2.5mm internal diameter
designed specifically for use with Line-6 Modelers. The Cable-Green can
be connected to any jack on the Cable-5 Daisy Chain or directly to the
PA-9 itself.
Also see: Universal Travel Adaptor Kit
|
 |