 |
Australia
Europe
North America
United Kingdom
• Can replace most any 9-volt DC power supply
• No transformer -- no heat dissipation or AC hum
• Takes up only one outlet socket space (unlike typical wall wart
adaptors).
• Can run off any mains supply (100-240v), no need for power transformers
when traveling abroad.
• Meets national safety regulations.
Daisy Chain connector is included in some kits and is available here
with straight or right angle plugs in 4, 5 and 11 output versions. Standard
polarity 5.5 mm x 2.1 mm (tip negative; barrel positive) plugs connects
the PA-9 Power-All to 9-volt effect pedals. The Daisy Chain can also be
used with Power-All adaptor cables to power effects that use different
style jacks (reverse polarity, mini phone plug, battery clip, etc.). Link
multiple Daisy Chain connectors to power many 9-volt effect pedals or
similar devices (actual number of units depends on current draw of individual
units used).
Order Extra Cables Here
Extension Jumper is included in some kits and is available here
with straight or right angle plugs. The Cable-Black allows users to power
over-sized effect units or units with AC jacks in hard-to-reach places.
The Cable-Black is about 10 inches long from jack to jack and can be connected
to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.
* Boss, DanElectro, DOD, Dunlop, Electro-Harmonix, Fulltone,
Ibanez, Line 6, MXR, Morley, Pro Co Rat, Z-Vex are registered trademarks
of their respective companies and their usage implies no endorsement by
or affiliation with Stompin-Ground or Godlyke, Inc.
 1/8" Phone Plug Jumper is included in some kits (also known
as a 3.5mm mini plug) and is available here
with straight or right angle plugs. The Cable-Blue allows users to power
effect units that use a 1/8" phone plug connector with tip-positive
polarity. The Cable-Blue can be connected to any jack on the Cable-5 Daisy
Chain or directly to the PA-9 itself. Note that to achieve tip-negative
polarity from the Cable-Blue, simply attach a Cable-Red in between it
and the power source. Tip positive / sleeve negative, for use with Jacques,
older DOD, Pro Co Rat, and some EH effects.
 Reverse Polarity Jumper is available here
with straight or right angle plugs. The Cable-Red allows the user to power
effect units that have reverse polarity barrel connectors. The Cable-Red
can be hooked to any jack on the Cable-5 daisy chain or directly to the
PA-9 itself. Center positive / barrel negative, for use with older Dunlop,
and some Fulltone effects.
Battery Clip Jumper is included in some kits and is available here.
The Cable-Gray allows the user to power vintage and boutique effect units
that do not have an external AC power jack. The Cable-Gray hooks directly
to the unit's Battery Clip and can be connected to any jack on the Cable-5
Daisy Chain or directly to the PA-9 itself. Use with older effects and
new boutique units without DC jacks such as older Ibanez, older MXR, Z-Vex
and others.
 Reverse Polarity Jumper is included in some kits and is available
here with straight or right angle plugs.
The Cable-Green allows the user to power Line-6 Stomp-Box modelers from
the PA-9. The Cable-Green features a reverse-polarity barrel connector
with a larger 2.5mm internal diameter designed specifically for use with
Line-6 Modelers. The Cable-Green can be connected to any jack on the Cable-5
Daisy Chain or directly to the PA-9 itself.
|
|
|
The world’s first high-current digital power
supply, the Power-All was specifically designed for guitar effect
users by guitar effect users. The Power-All provides clean, consistent,
noise-free power with an energy efficiency rating that archaic transformer-based
adaptors just can’t match. The Power-All is able to provide
a whopping 1700 or 2000 milliamps of current (depending on the version)
to meet the demands of today’s complex pedalboards and digital
multi-effects.
As all players’ needs are not the same, we
are now offering the Power-All in four different configurations
– PA-9 (standard, 1700 mA), PA-9S (Supply Only, 2000 mA),
PA-9B (powers 5 effects, 2000 mA) and PA-9D (powers 11 effects,
2000 mA). Often imitated but never matched, the Power-All ’s
simple-yet-ingenious kit configurations include color-coded cables
that provide clear, concise connections for your effects.
Featuring professional-grade construction designed
to withstand the rigors of the road, Godlyke is so confident that
the Power-All is superior in design and construction to any other
digital power supply on the market that it comes with a lifetime
warranty – if anything ever goes wrong with your Power-All
, they will replace it at no charge to you!
The Power-All system – simple, ingenious, affordable and
effective – truly a Progression in Power!
|
|
More jumper cables than any other version!
The Standard PA-9 1700 mA Power-all System includes
(1) Cable-5 daisy chain connector, (1) straight and (1) angled 1/8"
mini plug jumper cable-Blue, (1) straight and (1) angled barrel-type
reverse polarity jumper cable-Red, two battery clip jumper cable-Grey,
(1) straight and (1) angled Line 6 modeler cable-Green and (1) straight
and (1) angled barrel-type extension jumper cable-Black for over-sized
effect or ones needing a longer reach (3) yellow insulator caps
for unused power leads and a lifetime warranty. Order
Extra Cables Here
|
|
|
Power supply only (no additional jumper cables)
• Power-All 9 VDC, 2000 milliamp digital
power supply
• LIFETIME WARRANTY – never buy another power supply!
• Power all your pedals from a single power supply
• Takes up only one outlet space
• Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro
DA-1, Dunlop ECB-003, Ibanez AC- 109, Guyatone AC-2, Maxon AC210N,
Zoom AD-0006 and just about any other 9 VDC power adaptor
• Special, low-noise circuitry reduces ripple current and
hum
• Ferrite-core filter module on power output cable reduces
noise and hum
• Powers 9 VDC effects from any electrical outlet in the world
• 10-foot power cable eliminates need for an extension cord
|
|
|
|
• Power-All 9 VDC, 2000 milliamp digital
power supply
• LIFETIME WARRANTY – never buy another power supply!
• Power all your pedals from a single power supply
• Takes up only one outlet space
• Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro
DA-1, Dunlop ECB-003, Ibanez AC- 109, Guyatone AC-2, Maxon AC210N,
Zoom AD-0006 and just about any other 9 VDC power adaptor
• Special, low-noise circuitry reduces ripple current and
hum
• Ferrite-core filter module on power output cable reduces
noise and hum
• Powers 9 VDC effects from any electrical outlet in the world
• 10-foot power cable eliminates need for an extension cord
• Cable-5/R five-connector right-angle Daisy Chain with spring-loaded
jacks for extra secure connections – no more losing power
mid-solo!
• (1) Cable-Blue 3.5 mm Phone Plug Jumper Cable for use with
EH and other vintage pedals
• (1) Cable-Green Line-6 Jumper Cable with spring loaded jack
for use with Line 6 Modelers and other pedals requiring a 2.5 mm
internal diameter jack
• (1) Cable-Grey Battery Clip Jumper Cables for pedals with
no DC input
• (1) Cable-Red/R right-angle Reverse Polarity Jumper Cable
with spring-loaded jack for powering tip positive pedals
• (3) Cable Cap insulator sheaths to cover power leads when
not in use . Order Extra Cables Here
|
|
|
|
• Power-All 9 VDC, 2000 milliamp digital
power supply
• LIFETIME WARRANTY – never buy another power supply!
• Power all your pedals from a single power supply
• Takes up only one outlet space
• Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro
DA-1, Dunlop ECB-003, Ibanez AC- 109, Guyatone AC-2, Maxon AC210N,
Zoom AD-0006 and just about any other 9 VDC power adaptor
• Special, low-noise circuitry reduces ripple current and
hum
• Ferrite-core filter module on power output cable reduces
noise and hum
• Powers 9 VDC effects from any electrical outlet in the world
• 10-foot power cable eliminates need for an extension cord
• Cable-11/R eleven-connector right-angle Daisy Chain with
spring-loaded jacks for extra secure connections – no more
losing power mid-solo!
• (1) Cable-Blue/R right-angle 3.5 mm Phone Plug Jumper Cable
for use with EH and other vintage pedals
• (1) Cable-Green Line-6 Jumper Cable with spring loaded jack
for use with Line 6 Modelers and other pedals requiring a 2.5 mm
internal diameter jack
• (1) Cable-Green/R right-angle Line-6 Jumper Cable
• (1) Cable-Grey Battery Clip Jumper Cables for pedals with
no DC input
• (1) Cable-Red/R right-angle Reverse Polarity Jumper Cable
with spring-loaded jack for powering tip positive pedals
• (5) Cable Cap insulator sheaths to cover power leads when
not in use
|
|
|
Also see: Universal Travel Adaptor Kit
Designed to meet all your power needs.
An effective and affordable method to power your 9-volt
effects. Advanced digital circuitry steps down high line voltages
to 9-volts and automatically supplies the required amount of current.
The high current capability can power over twenty 9-volt effects. Additional
daisy chains and assorted jumper cables to power phone plug, reverse polarity,
battery-only, and Line 6 units are available. You can order extra cables
here.
The modular Godlyke Power-All digital system allows for
multiple effects to link to the PA-9 via the easy-to-use daisy chain connector.
In addition, the Power-All has four types of adapter cables available
for compatibility with effects pedals that don’t use standard polarity
tip negative / barrel positive jacks. 9-volt supply can power many 9-volt
effect pedals or similar devices. Actual number of units depends on current
draw of individual pedals used. Always check the devices power requirements
before connecting it to the Power-All.
We have extra stock cables and even some custom extensions available.
Click here and see more cables for the Power
All System
|
|
